Recycled high impact fire-rated sheet
Introduction
KYDEX® V103 sheet is a recycled grade of a proprietary thermoplastic sheet that is cost competitive with other grades of thermoplastic sheet while offering improved performance.
General
Information
KYDEX® V103 is Underwriters Laboratories, Inc® recognized Std 94 V-0, 5V. It has thermoforming cycle times equivalent to FR-ABS.
Suggested
Applications
- Equipment Housings
- Miscellaneous Applications
- Exhibits and Displays
Features
- Formulated to substitute for FR-ABS
- Very good impact resistance
- Easy to form with excellent part definition and deep-draw characteristics
- Recognized by Underwriters Laboratories, Inc® for Std 94 V-0, 5V
- Similar forming times to FR-ABS
- Available in 7 distinctive textures
Environmental
& Safety
Considerations
SEKISUI KYDEX®, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, disposed and recycled with an appropriate regard for safety, health and environmental protection. We support the safe handling of our products. Please contact our Technical Service department at 800.682.8758 for resources or visit our website: http://www.kydex.com. For Material Safety Data Sheets, please call 800.325.3133.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.35 | |
| Rockwell Hardness, R-scale | ASTM D785 | 94 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 41 MPa | 6,000 psi |
| Flexural Strength | ASTM D790 | 65.5 MPa | 9,300 psi |
| Flexural Modulus | ASTM D790 | 2,480 MPa | 360,000 psi |
| Izod Impact, notched | ASTM D256 | 427 J/m | 8 ft-lb/inf |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) annealed | ASTM D648 | 73.9ºC | 165ºF |
| FLAMMABILITY | |||
| Underwriters Laboratories, Inc.® Component Recognition | UL Standard 942 | V-0,5V | |
| THERMOFORMING | |||
| Temperature Range | 163 – 200°C | 325 – 392°F | |
| Mold Shrinkage – male mold | 0.40 – 0.60% | ||
| 1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified. 2 Underwriters Laboratories, Inc.®, File Number E115252 3 All thicknesses 0.71mm (0.028”) and above Not intended for specification purposes. | |||