[site_banner]

Home / Technical Data Sheet / KYDEX® 2210LT

KYDEX® 2210LT

EN45545, R1 & R6 Hazard Level 2 compliant sheet for rail interior applications

Download

Introduction

KYDEX® 2210LT is a high performance thermoplastic sheet designed for use in rail interior applications where EN45545 R1 & R6 Hazard Level 2 compliance is required.

General
Information

KYDEX® 2210LT is an alternative to FRP, metal and melamine that offers significant weight savings.

Suggested
Applications

  • Seatbacks
  • Armrests
  • Window Shrouds
  • Bulkhead Components
  • Wall and Ceiling Panels

Features

  • Meets the stringent requirements of EN45545, R1 & R6 Hazard Level 2 for EN45545
  • Integral colour eliminates the need for painting or gel coat.
  • Excellent resistance to graffiti, chemicals, and staining
  • Excellent formability and fabrication characteristics
  • Avaliable in P3 – Velour Matte and PC – Level Haircell textures

Environmental
& Safety
Considerations

SEKISUI KYDEX®, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, disposed and recycled with an appropriate regard for safety, health and environmental protection. We support the safe handling of our products. Please contact our Technical Service department at 800.682.8758 for resources or visit our website: http://www.kydex.com. For Material Safety Data Sheets, please call 800.325.3133.

Property Test Method Typical Value1
PHYSICAL
Specific Gravity ASTM D792 1.35
Density ASTM D792 1.35 g/cm3 0.0488 lb/in3
Water Absorption, 24hr ASTM D570 0.12%
Rockwell Hardness, R-scale ASTM D785 116
MECHANICAL
Tensile Strength ASTM D638 64.1 MPa 9,300 psi
Tensile Modulus ASTM D638 5,078 MPa 736,500 psi
Poisson’s Ratio ASTM D638 0.499
Flexural Strength ASTM D790 100.0 MPa 14,500 psi
Flexural Modulus ASTM D790 4,422 MPa 641,300 psi
Compressive Strength, yield ASTM D695 194.1 MPa 28,150 psi
Compressive Modulus ASTM D695 2,775 MPa 402,500 psi
Shear Strength ASTM D732 49.3 MPa 7,150 psi
Bearing Strength, 4% deflection ASTM D953 16.9 MPa 2,445 psi
Notched Izod Impact ASTM D256 48.6 J/m 0.91 ft-lb /in f
Garnder Drop Dart Impact, GE ASTM D5420 32.9 J 291 in-lb f
THERMAL
Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) annealed ASTM D648 98.9°C 210°F
Coefficient of Thermal Expansion ASTM E831 96.6 mm/m/oC (MD) 87.3 mm/m/oC (TD) 53.7 min/in/oF (MD) 48.5 min/in/oF (TD)
ELECTRICAL
Dielectric Strength ASTM D149 16.3 kV/mm 415 V/mil
FLAMMABILITY2
EN 45545-2: R1 Interior Surfaces ISO 5658-2 (50kW) CFE HL2
EN 45545-2: R6 Passenger Seat Shells ISO 5659-2 (50kW) Ds(4), VOF, CIT 4 G HL2
1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified. 2 All thicknesses and colours Rough draft, final values may change Not intended for specification purposes.