Fire-rated sheet for exterior applications
Introduction
KYDEX® 1100UV is a weatherable, proprietary alloy sheet that brings new dimensions to equipment manufacturers in design freedom, formability, durability, break resistance, and fire retardancy.
General
Information
KYDEX® 1100UV is available in a wide range of custom colours, textures, and sheet sizes. It eliminates the need for painting through integral colour that will not chip nor wear away during the life-cycle of the part. It is Underwriters Laboratories, Inc® recognized to UL Std 94 V-0, 5V and UL 746C (f1) for UV exposure and water immersion.
Suggested
Applications
- EV Charging Stations
- Antenna/5G Covers
- Kiosk Housings
- Equipment Housings
Features
- Recognized by Underwriters Laboratories, Inc® for Standard 94 V-0, 5V in all thicknesses and colours
- UL 746C (f1) rated for UV exposure and water immersion
- Excellent weatherability, colour retention characteristics
- Good for deep or hard to form parts
- Uniform wall thickness and crisp detail
- Easy machining and fabricating using conventional methods and equipment
- Integral colour that will not chip nor wear away
Environmental
& Safety
Considerations
SEKISUI KYDEX®, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, disposed and recycled with an appropriate regard for safety, health and environmental protection. We support the safe handling of our products. Please contact our Technical Service department at 800.682.8758 for resources or visit our website: http://www.kydex.com. For Material Safety Data Sheets, please call 800.325.3133.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.35 | |
| Rockwell Hardness, R-scale | ASTM D785 | 94 | |
| Moisture Absorption, 24h | ASTM D570 | 0.09% | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 42 MPa | 6,100 psi |
| Tensile Modulus | ASTM D638 | 2,400 MPa | 353,000 psi |
| Flexural Strength | ASTM D790 | 63 MPa | 9,100 psi |
| Flexural Modulus | ASTM D790 | 2,310 MPa | 335,000 psi |
| Izod Impact, notched | ASTM D256 | 961 J/m | 18 ft-lb/inf |
| Compressive Strength, yield | ASTM D695 | 52 MPa | 7,500 psi |
| Compressive Modulus | ASTM D695 | 2,600 MPa | 379,000 psi |
| Shear Strength | ASTM D732 | 46 MPa | 6,790 psi |
| Bearing Strength, 4% deflection | ASTM D953 | 30 MPa | 4,400 psi |
| Bearing Strength, max | ASTM D953 | 206 MPa | 29,900 psi |
| Gardner Drop Dart Impact, GE | ASTM D5420 | 70 J | 624 in-lbf |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) annealed | ASTM D648 | 78.3 ºC | 173 ºF |
| Coefficient of Linear Thermal Expansion | ASTM E831 | 7.56 x 10-5 ºC | 4.2 x 10-5 ºF |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 16.5 kV/mm | 420 V/mil |
| FLAMMABILITY | |||
| Underwriters Laboratories, Inc.® Component Recognition | UL Standard 942 3 UL Standard 746C4 | V-0, 5V, f1 | |
| 1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified 2 Underwriters Laboratories, Inc.®, File Number E115252 3 All thicknesses 0.71mm (0.028”) and above 4 UV exposure and water immersion * Not intended for specification purposes | |||