High impact, fire rated PC/ABS, high gloss sheet
Introduction
ALLEN® 8300FR is a polycarbonate and ABS blend with high impact properties, stiffness, heat resistance, and a non-halogenated flame retardant V-0 @ 0.060”, 5VA @ 0.118” rating.
General
Information
ALLEN® 8300FR has been tested under laboratory conditions and has achieved a UL94 V-0 rating at 0.060 in 1.52mm) and above and meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Medical Equipment Housings
- Electrical Housings and Covers
- Vehicle Interior Trim Parts
- Battery Charging Station
Features
- Flame retardant
- Halogen free
- Low smoke toxicity
- High heat deflection temperature
- Increased stiffness
- Edge trim easily used into future orders
- High gloss finish
Environmental
& Safety
Considerations
SEKISUI KYDEX®, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, disposed and recycled with an appropriate regard for safety, health and environmental protection. We support the safe handling of our products. Please contact our Technical Service department at 800.682.8758 for resources or visit our website: http://www.kydex.com. For Material Safety Data Sheets, please call 800.325.3133.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.21 | |
| Water Absorption, 24hr | ASTM D570 | 0.14 % | |
| Rockwell Hardness, R-Scale | ASTM D785 | 119 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 9,440 psi | 65.1 MPa |
| Tensile Modulus | ASTM D638 | 381,000 psi | 2626.9 MPa |
| Flexural Modulus | ASTM D790 | 381,000 psi | 2626.9 MPa |
| Flexural Stress at 5% Strain | ASTM D790 | 14,600 psi | 100.7 MPa |
| Compressive Strength, yield | ASTM D695 | 11,700 psi | 80.7 MPa |
| Shear Strength | ASTM D732 | 8,980 psi | 61.9 MPa |
| Bearing Strength, 4% deflection | ASTM D953 | 4,280 psi | 29.5 MPa |
| Bearing Strength, max. | ASTM D953 | 42,500 psi | 293.0 MPa |
| Notched Izod Impact Resistance | ASTM D256 | 12 ft-lbs/in | 640.8 J/m |
| Gardner Drop Dart Impact, GE | ASTM D5420 | 605 in-lbf | 68.4 J |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @264 psi (1.8 MPa), unannealed | ASTM D648 | 228.0 °F | 109 °C |
| Heat Deflection Temperature (HDT) @66 psi (0.45 MPa), unannealed | ASTM D648 | 233.4 °F | 112 °C |
| Coefficient of Thermal Expansion (MD) | ASTM E831 | 37.8 μin/in/°F | 68 μm/m/°C |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 425 V/mil | 16.7 kV/mm |
| FLAMMABILITY | |||
| Underwriters Laboratories., Inc ® Component Recognition | UL Standard 942 | V-0 @ 0.060” (1.52mm) | |
| Motor Vehicle Safety Standard | FMVSS 302 | PASS | |
| 1 Values based upon 0.125” (3.17mm) sheet unless otherwise specified. 2 UL File# #E115252 Not intended for specification purposes. | |||