High impact, high HDT PC/ABS, high gloss sheet
Introduction
ALLEN® 8150SM is a general purpose PC/ABS with high impact strength and high heat deflection.
General
Information
ALLEN® 8150SM meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Vehicle Interior Trim
- Covers and Housings
- Vehicle Exteriors (painted)
- Instrument Panels
Features
- Custom color matching
- Good forming properties
- Edge trim easily used for future orders
- High heat deflection temperature
- High gloss finish
- Meets many automotive specification
Environmental
& Safety
Considerations
SEKISUI KYDEX®, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, disposed and recycled with an appropriate regard for safety, health and environmental protection. We support the safe handling of our products. Please contact our Technical Service department at 800.682.8758 for resources or visit our website: http://www.kydex.com. For Material Safety Data Sheets, please call 800.325.3133.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.13 | |
| Water Absorption, 24hr | ASTM D570 | 0.17% | |
| Rockwell Hardness, R-Scale | ASTM D785 | 111 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 6,960 psi | 48.0 MPa |
| Tensile Modulus | ASTM D638 | 304,000 psi | 2096.0 MPa |
| Flexural Modulus | ASTM D790 | 323,000 psi | 2227.0 MPa |
| Flexural Stress at 5% Strain | ASTM D790 | 11,600 psi | 80.0 MPa |
| Compressive Strength, yield | ASTM D695 | 8,590 psi | 59.2 MPa |
| Shear Strength | ASTM D732 | 7,830 psi | 54.0 MPa |
| Bearing Strength, 4% deflection | ASTM D953 | 4,040 psi | 27.9 MPa |
| Bearing Strength, max. | ASTM D953 | 33,100 psi | 228.2 MPa |
| Notched Izod Impact Resistance | ASTM D256 | 9.81 ft-lbs/in | 523.9 J/m |
| Gardner Drop Dart Impact, GE | ASTM D5420 | 443 in-lbf | 50.1 J |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @264 psi (1.8 MPa), unannealed | ASTM D648 | 244.4 °F | 118 °C |
| Heat Deflection Temperature (HDT) @66 psi (0.45 MPa), unannealed | ASTM D648 | 264.2 °F | 129 °C |
| Coefficient of Thermal Expansion (MD) | ASTM E831 | 42.8 μin/in/°F | 77 μm/m/°C |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 552 V/mil | 21.7 kV/mm |
| FLAMMABILITY2 | |||
| Motor Vehicle Safety Standard | FMVSS 302 | PASS | |
| 1 Values based upon 0.125” (3.17mm) sheet unless otherwise specified. 2 All thicknesses Not intended for specification purposes. | |||