Co-extruded, High Impact ASA/ABS, Low to Medium Gloss Sheet
Introduction
ALLEN® 5050WLG is high impact ABS capped with low to medium gloss ASA for UV protection.
General
Information
ALLEN® 5050WLG has been tested under laboratory conditions and has achieved a UL94 HB rating at 0.060 in (1.52mm) and above and meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Vehicle Exteriors
- Radomes
- Agriculture Equipment Exteriors
- Construction Equipment Exteriors
- Marine Parts
Features
- Custom color matching
- Excellent UV properties
- Edge trim easily used into future orders
- Low to medium gloss finish
- Good low temperature performance
Environmental
& Safety
Considerations
SEKISUI KYDEX®, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, disposed and recycled with an appropriate regard for safety, health and environmental protection. We support the safe handling of our products. Please contact our Technical Service department at 800.682.8758 for resources or visit our website: http://www.kydex.com. For Material Safety Data Sheets, please call 800.325.3133.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.02 – 1.04 g/cc | |
| Gloss, 60° Angle | ASTM D523 | 30 – 70 % | |
| MECHANICAL | |||
| Tensile Strength, yield | ASTM D638 | 34.4 MPa | 5,000 psi |
| Flexural Strength | ASTM D790 | 55.1 MPa | 8,000 psi |
| Flexural Modulus | ASTM D790 | 1,965 MPa | 285,000 psi |
| Notched Izod Impact Resistance | ASTM D256 | 283.5 J/m | 5.3 ft-lbs/in |
| Notched Izod Impact Resistance @ -30°C (-22°F) | ASTM D256 | 165.5 J/m | 3.1 ft-lbs/in |
| THERMAL | |||
| Heat Deflection Temperature (HDT) 264 psi (1.8 MPa), Annealed | ASTM D648 | 79.4°C | 175°F |
| Heat Deflection Temperature (HDT) 66 psi (0.45 MPa), Annealed | ASTM D648 | 90.6°C | 195°F |
| Mold Shrinkage | ASTM D955 | 0.005 – 0.007 in/in | |
| FLAMMABILITY2 | |||
| Underwriters Laboratories., Inc ® Component Recognition | UL Standard 942 | HB @ 1.52mm (0.060in) | |
| Motor Vehicle Safety Standard | FMVSS 302 | Passes | |
| 1 Values based upon injection molded resin.. 2 ALLEN® 5050WLG has been tested under laboratory conditions and has passed UL 94HB criteria. SEKISUI KYDEX, LLC makes no warranty or guarantee that these products will meet UL 94HB in the part’s final, finished configuration. Not intended for specification purposes. | |||