Capped woodgrain sheet for flat lamination and membrane press applications
Introduction
KYDEX® XDWG is a decorative wood grain thermoplastic 3D laminate giving designers the ability to incorporate compound cor- ners, logos, and wire management holes while eliminating unsightly seams and the need for edgebanding typically associated with HPL/TFM surfaces. Its integral colour and high impact resistance minimizes costly maintenance associated with other laminates.
General
Information
High impact, membrane pressable thermoplastic 3D laminate with wood grain design in 0.91mm (0.036”) thickness. While providing great INFORMATION definition it surpasses vinyl overlays, high pressure laminates and melamine in resistance to surface and edge impact.
Suggested
Applications
- Store fixtures • Kiosks
- APPLICATIONS • Checkout counters • Cabinetry
- Exhibits and displays • Door and drawer fascias
- Moldings • Pedestals and stands
- Transaction surfaces • Tabletops
- Workstations • Logo and trademark panels
- Flat laminated panels
Features
- Tough and durable – resistant to cracking and chipping
- Available in a variety of wood grain designs
- Matched to popular high pressure laminates and melamines
- Resistant to a wide range of chemicals
- Abrasion resistant
- Fire retardant
- Excellent fabrication qualities
- Very low moisture absorption
- Membrane pressable
- Flexibility allows small radius bends
- PRINT WIDTH KYDEX® XDWG is offered with a range of decorative options via lamination of printed films. SEKISUI KYDEX, LLC purchases
- these printed films from various suppliers whose production capabilities differ. Among these production variations is the print width.
- While many film designs print at least 1346.2mm (53”) of coverage, SEKISUI KYDEX, LLC purchases some designs with less print
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Light Resistance | NEMA LD3.3 | No Effect | |
| Cleanability | NEMA LD3.4 | 14 | |
| Stain Resistance | NEMA LD3.4 | No Effect (1-2, 4-15) Severe Effect (3) | |
| Boiling Water Resistance | NEMA LD3.5 | No Effect | |
| High Temperature Resistance (Oil) | NEMA LD3.6 | Moderate Effect | |
| Linear Glass Scratch Resistance | NEMA LD3.7 | <50g | |
| Diamond Scratch Resistance | NEMA LD3.7 | 2 | |
| Ball Impact Resistance | NEMA LD3.8 | >3,000mm | |
| Dart Impact Resistance | NEMA LD3.9 | >875mm | |
| Radiant Heat Resistance (Coil) | NEMA LD3.10 | 43 sec | |
| Radiant Heat Resistance (Strip) | NEMA LD3.10 | 51 sec | |
| Dimensional Change | NEMA LD3.11 | MD: 1.05% TD: 0.67% | |
| Room Temperature Dimensional Stability | NEMA LD3.12 | MD: 0.08% TD: 0.07% | |
| Wear Resistance | NEMA LD3.13 | 650 cycles | |
| FLAMMABILITY | |||
| Steiner Tunnel Flame Spread/Smoke Development | ASTM E84 | Class 1/A | |
| 1 Values based upon 0.91mm (0.036”) sheet unless otherwise specified. Not intended for specification purposes. | |||