Integral pearlescent sheet for flat lamination and membrane pressed applications
Introduction
KYDEX® XD03 is a proprietary, high performance thermoplastic sheet specifically formulated to meet aesthetic effect for the design needs of the building and retail interiors industry. Integrally pearlescent, this sheet is perfect for use with LED lighting or on its own.
General
Information
KYDEX® XD03: superior impact, membrane pressable thermoplastic 3D laminate with integral pearlescent color. While pro- INFORMATION viding good definition, it surpasses vinyl overlays, high pressure laminates and melamine in resistance to surface and edge impact. For flat lamination and membrane pressing.
Suggested
Applications
- Store fixtures • Kiosks
- APPLICATIONS • Checkout counters • Cabinetry
- Exhibits and displays • Door and drawer fascias
- Pedestals and stands • Exhibits and displays
- Transaction surfaces • Tabletops
- Workstations • Logo and trademark panels
- Flat laminated panels • Wainscot
Features
- Highlighted in a collection of 32 developed colours, colour matching also available
- Available in P-K texture and thicknesses 0.76mm (0.030”) to 1.02mm (0.040”)
- Easy to clean with aggressive cleaners such as Soft Scrub®, Fantastic®, and citrus-based cleaners such as
- Citri Kleen® (avoid ammoniated cleaners)
- Crisp detail, minimal rejects
- Can be formed on all standard presses and cut on all standard die-cutting machines
- Secondary operations including machining, sawing, blanking, punching, etc. are easily performed
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, dis- & SAFETY posed and recycled with an appropriate regard for safety, health and environmental protection. We support the safe
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Light Resistance | NEMA LD3.3 | Severe Effect | |
| Cleanability/Stain Resistance | NEMA LD3.4 | No Effect | |
| Boiling Water Resistance | NEMA LD3.5 | Severe Effect | |
| High Temperature Resistance (Oil) | NEMA LD3.6 | Moderate Effect | |
| Linear Glass Scratch Resistance | NEMA LD3.7 | <50g | |
| Diamond Scratch Resistance | NEMA LD3.7 | 3 | |
| Ball Impact Resistance | NEMA LD3.8 | >3,000mm | |
| Dart Impact Resistance | NEMA LD3.9 | >1,075mm | |
| Radiant Heat Resistance (Coil) | NEMA LD3.10 | 46 sec | |
| Radiant Heat Resistance (Strip) | NEMA LD3.10 | 47 sec | |
| Dimensional Change | NEMA LD3.11 | MD: 0.26% TD: 0.39% | |
| Room Temperature Dimensional Stability | NEMA LD3.12 | MD: 0.07% TD: 0.03% | |
| Wear Resistance | NEMA LD3.13 | 3,700 cycles | |
| FLAMMABILITY | |||
| Steiner Tunnel Flame Spread/Smoke Development | ASTM E84 | Class 1/A (thicknesses 1.02mm (0.040”) or less) | |
| 1 Values based upon 0.76mm (0.030”) sheet unless otherwise specified. Not intended for specification purposes. | |||
| NOTE: Material appearance will change in proportion to the amount of heat applied during processing. | |||