Sheet for flat lamination and membrane pressed applications with antimicrobial protection
Introduction
KYDEX® XD MB is a thermoplastic 3D laminate giving designers the ability to incorporate compound corners, logos, and wire management holes while eliminating unsightly seams and the need for edgebanding typically associated with HPL/TFM surfaces. Its integral colour and superior impact resistance minimizes costly maintenance associated with other laminates. Antimicrobial protection is built-in to continuously fight the growth of microbes.
General
Information
Extreme durability (XD), superior impact, membrane pressable thermoplastic 3D laminate with integral color in 0.76mm-1.02mm INFORMATION (0.030”-0.040”) thickness. While providing good definition it surpasses vinyl overlays, high pressure laminates and melamine in resistance to surface and edge impact.
Suggested
Applications
- Store Fixtures • Kiosks
- APPLICATIONS • Checkout Counters • Cabinetry
- Exhibits and Displays • Door and Drawer Fascias
- Moldings • Pedestals and Stands
- Transaction Surfaces • Gondolas
- Workstations • Tabletops
- Logo and Trademark Panels • Flat Laminated Panels
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, disposed and & SAFETY recycled with an appropriate regard for safety, health and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.35 | |
| Rockwell Hardness, R-scale | ASTM D785 | 94 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 42 MPa | 6,100 psi |
| Tensile Modulus | ASTM D638 | 2,416 MPa | 351,000 psi |
| Elongation | ASTM D638 | 126% | |
| Flexural Strength | ASTM D790 | 66 MPa | 9,600 psi |
| Flexural Modulus | ASTM D790 | 2,480 MPa | 360,000 psi |
| Izod Impact, notched | ASTM D256 | 801 J/m | 15 ft-lb/in f |
| Abrasion Resistance2 | ASTM D1044 | 0.0095 | |
| Ball Impact Resistance3 | NEMA LD3 – 2005 | >3,000 | |
| Dart Impact Resistance3 | NEMA LD3 – 2005 | >1,000 | |
| Cleanability | NEMA LD3 – 2005 | 16 | |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) annealed | ASTM D648 | 75.6ºC | 168ºF |
| FLAMMABILITY | |||
| Steiner Tunnel Flame Spread/Smoke Development | ASTM E84 | Class 1/A | |
| Fire classification of Construction Products and Building Elements | EN 13501-1 | Class B, s2, d0 (0.76mm) Class C, s2, d0 (1.02mm) | |
| 1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified. 2 Type CS10F wheel, 500gm load, weight loss (gms) per 1000 cycles. 3 Values based upon 1.02mm (0.040”) sheet. Not intended for specification purposes. | |||