Flat lamination and membrane press sheet with premium antimicrobial protection
Introduction
KYDEX® XD-ION is a thermoplastic 3D laminate giving designers the ability to incorporate compound corners, logos, and wire management holes while eliminating unsightly seams and the need for edgebanding typically associated with HPL/TFM surfaces. Its integral color and superior impact resistance minimizes costly maintenance associated with other laminates. Its built-in antimicrobial protection, KYDEX ION Technology™, continuously fights the growth of stain and odor causing bacteria on its surface.
General
Information
Extreme durability (XD), superior impact, membrane pressable thermoplastic 3D laminate with integral color in 0.76mm INFORMATION and 1.02mm (0.030” and 0.040”) thicknesses. While providing good definition it surpasses vinyl overlays, high pressure laminates and melamine in resistance to surface and edge impact. Its KYDEX ION Technology™ is integral to the sheet.
Suggested
Applications
- Store fixtures • Kiosks
- APPLICATIONS • Checkout counters • Cabinetry
- Exhibits and displays • Door and drawer fasciae
- Workstations • Pedestals and stands
- Flat laminated panels • Tabletops
- Logo and trademark panels • Gondolas
Features
- Antimicrobial protection inhibits the growth of stain and odor causing bacteria on the sheet surface
- Antimicrobial protection is integrated into the sheet
- Antimicrobial protection keeps the surface cleaner between cleanings
- Membrane pressable to create seamless edges, eliminating edgebanding
- Resistant to cracking and chipping
- Solid, integral colour
- Resistant to a wide range of chemicals
- Inherently fire retardant, no flame retardants added to material
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products. Contact SEKISUI KYDEX appLab™ team for more details about KYDEX ION Technology™, resources, and Safety Data Sheets at 800.682.8758 or visit our website: www.kydex.com.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.35 | |
| Rockwell Hardness, R-scale | ASTM D785 | 94 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 48.9 MPa | 7,100 psi |
| Tensile Modulus | ASTM D638 | 2,640 MPa | 383,000 psi |
| Flexural Strength | ASTM D790 | 67.2 MPa | 9,750 psi |
| Flexural Modulus | ASTM D790 | 2,151 MPa | 312,000 psi |
| Abrasion Resistance2 | ASTM D1044 | 0.0095 | |
| Ball Impact Resistance | NEMA LD3 – 2005 | >3,000 | |
| Dart Impact Resistance | NEMA LD3 – 2005 | >1,000 | |
| Cleanability | NEMA LD3 – 2005 | 16 | |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) unannealed | ASTM D648 | 67.2ºC | 153ºF |
| FLAMMABILITY3 | |||
| Steiner Tunnel Flame Spread/Smoke Development | ASTM E84 | Class 1/A (test pending) | |
| 1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified. Based on in-house testing. Values may change upon completion of third party testing. 2 Type CS10F wheel, 500gm load, weight loss (gms) per 1000 cycles. 3 Values based upon 1.02mm (0.040”) sheet. (testing pending) Not intended for specification purposes. | |||