Recycled high impact fire-rated sheet
Introduction
KYDEX® V103 sheet is a recycled grade of a proprietary thermoplastic sheet that is cost competitive with other grades of thermoplastic sheet while offering improved performance.
General
Information
KYDEX® V103 is Underwriters Laboratories, Inc® recognized Std 94 V-0, 5V. It has thermoforming cycle times equivalent INFORMATION to FR-ABS.
Suggested
Applications
- Equipment Housings • Exhibits and Displays
- APPLICATIONS • Miscellaneous Applications
Features
- Formulated to substitute for FR-ABS
- Very good impact resistance
- Easy to form with excellent part definition and deep-draw characteristics
- Recognized by Underwriters Laboratories, Inc® for Std 94 V-0, 5V
- Similar forming times to FR-ABS
- Available in 7 distinctive textures
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, dis- & SAFETY posed and recycled with an appropriate regard for safety, health and environmental protection. We support the safe
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.35 | |
| Rockwell Hardness, R-scale | ASTM D785 | 94 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 41 MPa | 6,000 psi |
| Flexural Strength | ASTM D790 | 65.5 MPa | 9,300 psi |
| Flexural Modulus | ASTM D790 | 2,480 MPa | 360,000 psi |
| Izod Impact, notched | ASTM D256 | 427 J/m | 8 ft-lb/in f |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) annealed | ASTM D648 | 73.9ºC | 165ºF |
| FLAMMABILITY | |||
| Underwriters Laboratories, Inc.® Component Recognition | UL Standard 942 | V-0,5V | |
| THERMOFORMING | |||
| Temperature Range | 163 – 200°C | 325 – 392°F | |
| Mold Shrinkage – male mold | 0.40 – 0.60% | ||
| 1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified. 2 Underwriters Laboratories, Inc.®, File Number E115252 3 All thicknesses 0.71mm (0.028”) and above Not intended for specification purposes. | |||