Smoke and toxicity compliant aviation sheet
Introduction
KYDEX® 7200ST is a high performance thermoplastic sheet designed for use in aviation interior applications where smoke and ABD0031 or BSS7239 toxicity compliance is required.
General
Information
KYDEX® 7200ST meets the flammability and smoke development requirements set forth in Federal Aviation Regulations INFORMATION (FAR) 25.853 paragraphs (a) and (d) Part V as well as the toxicity requirements for Airbus (ABD0031) and Boeing (BSS7239). Its wide processing window and ease of thermoforming makes it ideal for complex parts.
Suggested
Applications
- Armrests
- APPLICATIONS • Tray tables
- Kick panels
- Trim parts
Features
- Meets flammability and smoke development requirements listed in FAR 25.853(a) and (d) Part V
- Compliant to ABD0031 and BSS7239 toxicity specifications
- Excellent formability and fabrication characteristics
- Allows for tight tolerance control
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, dis- & SAFETY posed and recycled with an appropriate regard for safety, health and environmental protection. We support the safe
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.25 | |
| Water Absorption, 24hr | ASTM D570 | 0.16% | |
| Rockwell Hardness, R-scale | ASTM D785 | 112 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 53.5 MPa | 7,760 psi |
| Tensile Modulus | ASTM D638 | 2,868 MPa | 416,000 psi |
| Poisson’s Ratio | ASTM D638 | 0.37 | |
| Flexural Strength | ASTM D790 | 87.6 MPa | 12,700 psi |
| Flexural Modulus | ASTM D790 | 2,758 MPa | 400,000 psi |
| Compressive Strength, yield | ASTM D695 | 73.1 MPa | 10,600 psi |
| Compressive Modulus | ASTM D695 | 2,718 MPa | 394,000 psi |
| Shear Strength | ASTM D732 | 45.5 MPa | 6,600 psi |
| Bearing Strength, 4% deflection | ASTM D953 | 27.6 MPa | 4,000 psi |
| Bearing Strength, max. | ASTM D953 | 246 MPa | 35,700 psi |
| Gardner Drop Dart Impact, GE | ASTM D5420 | 46.9 J | 415 in-lb f |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) annealed | ASTM D648 | 100°C | 212°F |
| Coefficient of Thermal Expansion | ASTM E831 | 51.4 µm/m/°C | 28.6 µin/in/°F |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 22.4 kV/mm | 570 V/mil |
| FLAMMABILITY2 | |||
| Vertical Burn, 60-second Vertical Burn, 12-second | FAR 25.853(a)(i) FAR 25.853(a)(ii) | Pass Pass | |
| NBS Smoke Density | FAR 25.853(d) Part V | D <200 max | |
| Airbus Toxic Gas Generation | ABD0031 | Pass | |
| Boeing Toxic Gas Generation | BSS7239 | Pass | |
| 1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified. 2 All thicknesses Not intended for specification purposes | |||