EN45545, R1 & R6 Hazard Level 2 compliant sheet for rail interior applications
Introduction
KYDEX® 2210LT is a high performance thermoplastic sheet designed for use in rail interior applications where EN45545 R1 & R6 Hazard Level 2 compliance is required.
General
Information
KYDEX® 2210LT is an alternative to FRP, metal and melamine that offers significant weight savings.
Suggested
Applications
- Seatbacks • Bulkhead Components
- APPLICATIONS • Armrests • Wall and Ceiling Panels
- Window Shrouds
Features
- Meets the stringent requirements of EN45545, R1 & R6 Hazard Level 2 for EN45545
- Integral colour eliminates the need for painting or gel coat.
- Excellent resistance to graffiti, chemicals, and staining
- Excellent formability and fabrication characteristics
- Avaliable in P3 – Velour Matte and PC – Level Haircell textures
Environmental
& Safety
Considerations
SEKISUI KYDEX is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.35 | |
| Density | ASTM D792 | 1.35 g/cm3 | 0.0488 lb/in3 |
| Water Absorption, 24hr | ASTM D570 | 0.12% | |
| Rockwell Hardness, R-scale | ASTM D785 | 116 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 64.1 MPa | 9,300 psi |
| Tensile Modulus | ASTM D638 | 5,078 MPa | 736,500 psi |
| Poisson’s Ratio | ASTM D638 | 0.499 | |
| Flexural Strength | ASTM D790 | 100.0 MPa | 14,500 psi |
| Flexural Modulus | ASTM D790 | 4,422 MPa | 641,300 psi |
| Compressive Strength, yield | ASTM D695 | 194.1 MPa | 28,150 psi |
| Compressive Modulus | ASTM D695 | 2,775 MPa | 402,500 psi |
| Shear Strength | ASTM D732 | 49.3 MPa | 7,150 psi |
| Bearing Strength, 4% deflection | ASTM D953 | 16.9 MPa | 2,445 psi |
| Notched Izod Impact | ASTM D256 | 48.6 J/m | 0.91 ft-lb /in f |
| Garnder Drop Dart Impact, GE | ASTM D5420 | 32.9 J | 291 in-lb f |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) annealed | ASTM D648 | 98.9°C | 210°F |
| Coefficient of Thermal Expansion | ASTM E831 | 96.6 mm/m/oC (MD) 87.3 mm/m/oC (TD) | 53.7 min/in/oF (MD) 48.5 min/in/oF (TD) |
| ELECTRICAL | |||
| Dielectric Strength | ASTM D149 | 16.3 kV/mm | 415 V/mil |
| FLAMMABILITY2 | |||
| EN 45545-2: R1 Interior Surfaces | ISO 5658-2 (50kW) CFE | HL2 | |
| EN 45545-2: R6 Passenger Seat Shells | ISO 5659-2 (50kW) Ds(4), VOF, CIT 4 G | HL2 | |
| 1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified. 2 All thicknesses and colours Rough draft, final values may change Not intended for specification purposes. | |||