Fire-rated sheet for exterior applications
Introduction
KYDEX® 1100UV is a weatherable, proprietary alloy sheet that brings new dimensions to equipment manufacturers in design freedom, formability, durability, break resistance, and fire retardancy.
General
Information
KYDEX® 1100UV is available in a wide range of custom colours, textures, and sheet sizes. It eliminates the need INFORMATION for painting through integral colour that will not chip nor wear away during the life-cycle of the part. It is Underwriters Laboratories, Inc® recognized to UL Std 94 V-0, 5V and UL 746C (f1) for UV exposure and water immersion.
Suggested
Applications
- EV Charging Stations
- APPLICATIONS • Antenna/5G Covers
- Kiosk Housings
- Equipment Housings
Features
- Recognized by Underwriters Laboratories, Inc® for Standard 94 V-0, 5V in all thicknesses and colours
- UL 746C (f1) rated for UV exposure and water immersion
- Excellent weatherability, colour retention characteristics
- Good for deep or hard to form parts
- Uniform wall thickness and crisp detail
- Easy machining and fabricating using conventional methods and equipment
- Integral colour that will not chip nor wear away
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.35 | |
| Rockwell Hardness, R-scale | ASTM D785 | 94 | |
| Moisture Absorption, 24h | ASTM D570 | 0.09% | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 42 MPa | 6,100 psi |
| Tensile Modulus | ASTM D638 | 2,400 MPa | 353,000 psi |
| Flexural Strength | ASTM D790 | 63 MPa | 9,100 psi |
| Flexural Modulus | ASTM D790 | 2,310 MPa | 335,000 psi |
| Izod Impact, notched | ASTM D256 | 961 J/m | 18 ft-lb/in f |
| Compressive Strength, yield | ASTM D695 | 52 MPa | 7,500 psi |
| Compressive Modulus | ASTM D695 | 2,600 MPa | 379,000 psi |
| Shear Strength | ASTM D732 | 46 MPa | 6,790 psi |
| Bearing Strength, 4% deflection | ASTM D953 | 30 MPa | 4,400 psi |
| Bearing Strength, max | ASTM D953 | 206 MPa | 29,900 psi |
| Gardner Drop Dart Impact, GE | ASTM D5420 | 70 J | 624 in-lb f |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) annealed | ASTM D648 | 78.3 ºC | 173 ºF |
| Coefficient of Linear Thermal Expansion | ASTM E831 | 7.56 x 10-5 ºC | 4.2 x 10-5 ºF |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 16.5 kV/mm | 420 V/mil |
| FLAMMABILITY | |||
| Underwriters Laboratories, Inc.® Component Recognition | UL Standard 942,3 UL Standard 746C4 | V-0, 5V, f1 | |
| 1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified 2 Underwriters Laboratories, Inc.®, File Number E115252 3 All thicknesses 0.71mm (0.028”) and above 4 UV exposure and water immersion * Not intended for specification purposes | |||