Metallic fire-rated sheet
Introduction
Super tough, durable KYDEX® 110, a proprietary alloy sheet, brings new dimensions to thermoformers in: formability, rigidity, breakage resistance, chemical resistance and fire retardancy.
General
Information
This high performance thermoplastic sheet is available in an assorted number of metallic colours. INFORMATION It is Underwriters Laboratories, Inc® recognized for UL Std 94 V-0, 5V.
Suggested
Applications
- Aircraft Interiors • Exhibits and Displays
- APPLICATIONS • Kiosk Housings • Store Fixtures
- Medical Housings • Office Furniture
- Miscellaneous Applications
Features
- For deep or hard to form parts where good finished detail is required
- More rigid than most thermoplastics so parts will deform less when loaded
- Meets highest standard for chemical resistance for thermoplastic materials
- Recognized by Underwriter’s Laboratories, Inc® for Std 94 V-0, 5V in all thicknesses and colors
- Excellent forming properties, uniform wall thicknesses
- Easy machining and fabricating using conventional methods and equipment
- Passes FFA Vertical Burn Testing according to FAR 25.853 (a) (i)&(ii)
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, dis- & SAFETY posed and recycled with an appropriate regard for safety, health and environmental protection. We support the safe
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.31 | |
| Rockwell Hardness, R-scale | ASTM D785 | 94 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 45 MPa | 6,500 psi |
| Flexural Strength | ASTM D790 | 76 MPa | 11,000 psi |
| Flexural Modulus | ASTM D790 | 2,450 MPa | 356,000 psi |
| Izod Impact, notched | ASTM D256 | 128 J/m | 2.4 ft-lb/in f |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @ 264 psi (1.8 MPa) annealed | ASTM D648 | 73.9ºC | 165ºF |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 22.8 kV/mm | 580 V/mil |
| FLAMMABILITY | |||
| Underwriters Laboratories, Inc.® Component Recognition | UL Standard 942 | V-0, 5V3 | |
| Vertical Burn, 60-second | FAR 25.853(a)(i) | Pass | |
| Vertical Burn, 12-second | FAR 25.853(a)(ii) | Pass | |
| Surface Burning Characteristics:4 Flame Spread/Smoke | ASTM E84 | Class 1/A | |
| 1 Values based upon 3.18mm (0.125”) sheet unless otherwise specified. 2 Underwriters Laboratories, Inc.®, File Number E115252 3 All thicknesses 0.71mm (0.028”) and above 4 All thicknesses 1.50mm (0.060”) and below Not intended for specification purposes. | |||