High impact, fire rated PC/ABS, high gloss sheet
Introduction
ALLEN® 8300FR is a polycarbonate and ABS blend with high impact properties, stiffness, heat resistance, and a non-halogenated flame retardant V-0 @ 0.060”, 5VA @ 0.118” rating.
General
Information
ALLEN® 8300FR has been tested under laboratory conditions and has achieved a UL94 V-0 rating at 0.060 in INFORMATION (1.52mm) and above and meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Medical Equipment Housings
- APPLICATIONS • Electrical Housings and Covers
- Vehicle Interior Trim Parts
- Battery Charging Station
Features
- Flame retardant
- Halogen free
- Low smoke toxicity
- High heat deflection temperature
- Increased stiffness
- Edge trim easily used into future orders
- High gloss finish
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.21 | |
| Water Absorption, 24hr | ASTM D570 | 0.14 % | |
| Rockwell Hardness, R-Scale | ASTM D785 | 119 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 9,440 psi | 65.1 MPa |
| Tensile Modulus | ASTM D638 | 381,000 psi | 2626.9 MPa |
| Flexural Modulus | ASTM D790 | 381,000 psi | 2626.9 MPa |
| Flexural Stress at 5% Strain | ASTM D790 | 14,600 psi | 100.7 MPa |
| Compressive Strength, yield | ASTM D695 | 11,700 psi | 80.7 MPa |
| Shear Strength | ASTM D732 | 8,980 psi | 61.9 MPa |
| Bearing Strength, 4% deflection | ASTM D953 | 4,280 psi | 29.5 MPa |
| Bearing Strength, max. | ASTM D953 | 42,500 psi | 293.0 MPa |
| Notched Izod Impact Resistance | ASTM D256 | 12 ft-lbs/in | 640.8 J/m |
| Gardner Drop Dart Impact, GE | ASTM D5420 | 605 in-lbf | 68.4 J |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @264 psi (1.8 MPa), unannealed | ASTM D648 | 228.0 oF | 109 oC |
| Heat Deflection Temperature (HDT) @66 psi (0.45 MPa), unannealed | ASTM D648 | 233.4 oF | 112 oC |
| Coefficient of Thermal Expansion (MD) | ASTM E831 | 37.8 μin/in/oF | 68 μm/m/oC |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 425 V/mil | 16.7 kV/mm |
| FLAMMABILITY | |||
| Underwriters Laboratories., Inc ® Component Recognition | UL Standard 942 | V-0 @ 0.060” (1.52mm) | |
| Motor Vehicle Safety Standard | FMVSS 302 | PASS | |
| 1 Values based upon 0.125” (3.17mm) sheet unless otherwise specified. 2 UL File# #E115252 Not intended for specification purposes. | |||