High impact, high HDT fire rated PC/ABS, high gloss medical grade sheet
Introduction
ALLEN® 8250MD is a general purpose FR PC/ABS with high impact strength and high heat deflection.
General
Information
ALLEN® 8250MD meets Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302) and meets UL94 V-0, 5V INFORMATION criteria when tested under laboratory conditions.
Suggested
Applications
- Covers and Housings
- APPLICATIONS • Fan Shrouds
- Healthcare / Medical Equipment
- MRI panels
- Instrument Panels
Features
- Custom color matching
- Good forming properties
- Edge trim easily used for future orders
- High heat deflection temperature
- High gloss finish
- Meets many medical specifications
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.28 | |
| Water Absorption, 24hr | ASTM D570 | 0.30% | |
| Rockwell Hardness, R-Scale | ASTM D785 | 98 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 9,430 psi | 65 MPa |
| Tensile Modulus | ASTM D638 | 518,000 psi | 3,570 MPa |
| Flexural Modulus | ASTM D790 | 508,000 psi | 3,500 MPa |
| Flexural Stress at 5% Strain | ASTM D790 | 16,000 psi | 110 MPa |
| Notched Izod Impact Resistance | ASTM D256 | 9.4 ft-lbs/in | 500 J/m |
| Notched Izod Impact Resistance, -22°F (-30°C) | ASTM D256 | 1.7 ft-lbs/in | 90 J/m |
| Instrumented Dart Impact, Total Energy | ASTM D3763 | 33.2 ft-lb | 45 J |
| Ball Pressure Test, 95°C | IEC 60695-10-2 | PASS | |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @264 psi (1.8 MPa), unannealed | ASTM D648 | 192 oF | 89 oC |
| Heat Deflection Temperature (HDT) @66 psi (0.45 MPa), unannealed | ASTM D648 | 210 oF | 99 oC |
| Coefficient of Thermal Expansion (MD) | ASTM E831 | 28.9 μin/in/oF | 52.0 μm/m/oC |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 432 V/mil | 17 kV/mm |
| FLAMMABILITY | |||
| Underwriters Laboratories., Inc ® Component Recognition | UL Standard 942 | V-0, 5V @ 0.060” (1.5mm) | |
| Motor Vehicle Safety Standard | FMVSS 302 | PASS | |
| 1 Values based upon 0.125” (3.17mm) sheet unless otherwise specified. 2 Tested under independent laboratory conditions Not intended for specification purposes. | |||