High impact, fire rated PC/ABS, high gloss biocompatible medical grade sheet
Introduction
ALLEN® 8200BC is a bio compatible FR PC/ABS medical grade sheet with high impact strength and high heat deflection
General
Information
ALLEN® 8200BC meets Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302) and meets UL94 V-0, 5V INFORMATION criteria when tested under laboratory conditions.
Suggested
Applications
- Covers and Housings
- APPLICATIONS • Fan Shrouds
- Healthcare / Medical Equipment
- MRI panels
- Instrument Panels
Features
- Custom color matching
- Good forming properties
- Edge trim easily used for future orders
- High gloss finish • Meets many medical specifications
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.19 | |
| Water Absorption, 24hr | ASTM D570 | 0.50% | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 10,000 psi | 69 MPa |
| Tensile Modulus | ASTM D638 | 384,000 psi | 2,650 MPa |
| Flexural Modulus | ASTM D790 | 381,000 psi | 2626.9 MPa |
| Flexural Stress at 5% Strain | ASTM D790 | 14,600 psi | 100.7 MPa |
| Notched Izod Impact Resistance | ASTM D256 | 12.0 ft-lbs/in | 640.6 J/m |
| Notched Izod Impact Resistance, -20°F (-29°C) | ASTM D5420 | 3.31 ft-lbs/in | 176.7 J/m |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @264 psi (1.8 MPa), unannealed | ASTM D648 | 208 oF | 98 oC |
| Heat Deflection Temperature (HDT) @66 psi (0.45 MPa), unannealed | ASTM D648 | 223 oF | 106 oC |
| Coefficient of Thermal Expansion (MD) | ASTM E831 | 37.8 μin/in/oF | 68 μm/m/oC |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 889 V/mil | 35 kV/mm |
| FLAMMABILITY | |||
| Underwriters Laboratories., Inc ® Component Recognition | UL Standard 942 | V-0, 5V @ 0.060” (1.5mm) | |
| Motor Vehicle Safety Standard | FMVSS 302 | PASS | |
| 1 Values based upon 0.125” (3.17mm) sheet unless otherwise specified. 2 Tested under independent laboratory conditions Resin tested only according to ISO 10993-5 and ISO 10993-10 for contact with uncompromised skin Not intended for specification purposes. | |||