High impact, high HDT PC/ABS, high gloss sheet
Introduction
ALLEN® 8150SM is a general purpose PC/ABS with high impact strength and high heat deflection.
General
Information
ALLEN® 8150SM meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Vehicle Interior Trim
- APPLICATIONS • Covers and Housings
- Vehicle Exteriors (painted)
- Instrument Panels
Features
- Custom color matching
- Good forming properties
- Edge trim easily used for future orders
- High heat deflection temperature
- High gloss finish
- Meets many automotive specification
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.13 | |
| Water Absorption, 24hr | ASTM D570 | 0.17% | |
| Rockwell Hardness, R-Scale | ASTM D785 | 111 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 6,960 psi | 48.0 MPa |
| Tensile Modulus | ASTM D638 | 304,000 psi | 2096.0 MPa |
| Flexural Modulus | ASTM D790 | 323,000 psi | 2227.0 MPa |
| Flexural Stress at 5% Strain | ASTM D790 | 11,600 psi | 80.0 MPa |
| Compressive Strength, yield | ASTM D695 | 8,590 psi | 59.2 MPa |
| Shear Strength | ASTM D732 | 7,830 psi | 54.0 MPa |
| Bearing Strength, 4% deflection | ASTM D953 | 4,040 psi | 27.9 MPa |
| Bearing Strength, max. | ASTM D953 | 33,100 psi | 228.2 MPa |
| Notched Izod Impact Resistance | ASTM D256 | 9.81 ft-lbs/in | 523.9 J/m |
| Gardner Drop Dart Impact, GE | ASTM D5420 | 443 in-lbf | 50.1 J |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @264 psi (1.8 MPa), unannealed | ASTM D648 | 244.4 oF | 118 oC |
| Heat Deflection Temperature (HDT) @66 psi (0.45 MPa), unannealed | ASTM D648 | 264.2 oF | 129 oC |
| Coefficient of Thermal Expansion (MD) | ASTM E831 | 42.8 μin/in/oF | 77 μm/m/oC |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 552 V/mil | 21.7 kV/mm |
| FLAMMABILITY2 | |||
| Motor Vehicle Safety Standard | FMVSS 302 | PASS | |
| 1 Values based upon 0.125” (3.17mm) sheet unless otherwise specified. 2 All thicknesses Not intended for specification purposes. | |||