Acrylic Capped, Medium Impact ABS, High Gloss Sheet
Introduction
ALLEN® 6250HG is acrylic capped ABS with excellent surface hardness, UV protection, and distinction of image.
General
Information
ALLEN® 6250HG has been tested under laboratory conditions and has achieved a UL94 HB rating at 0.060 in INFORMATION (1.52mm) and above and meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Tub and Shower Surrounds
- APPLICATIONS • Sinks
- Kayaks
- Agriculture Equipment
- Marine parts
Features
- Custom color matching
- UV protection
- Hard surface
- High gloss finish
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.07 – 1.10 | |
| Density | ISO 1183 | 1.07 – 1.10 g/cm3 | 0.039 – 0.040 lb/in3 |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 34.4 MPa | 5,000 psi |
| Tensile Modulus | ASTM D638 | 31.0 MPa | 4,500 psi |
| Flexural Modulus | ASTM D790 | 2,034 MPa | 295,000 psi |
| Flexural Strength | ASTM D790 | 68.9 MPa | 10,000 psi |
| Notched Izod Impact, 23 oC (73 oF) | ASTM D256 | 186 J/m | 3.5 ft-lb/in |
| THERMAL | |||
| Heat Deflection Temperature (HDT) 264 psi (1.8 MPa), Unannealed | ASTM D648 | 79.4°C | 175°F |
| Heat Deflection Temperature (HDT) 66 psi (0.45 MPa), Unannealed | ASTM D648 | 90.6°C | 195°F |
| Mold Shrinkage | ASTM D955 | 0.004 – 0.007 in/in | |
| FLAMMABILITY2 | |||
| Underwriters Laboratories., Inc ® Component Recognition | UL Standard 942 | HB @ 1.52mm (0.060 in) | |
| Motor Vehicle Safety Standard | FMVSS 302 | Passes | |
| 1 Values based upon 0.125” (3.17mm) sheet unless otherwise specified.. 2 ALLEN® 6250HG has been tested under laboratory conditions and has passed UL 94HB criteria. SEKISUI KYDEX, LLC makes no warranty or guarantee that these products will meet UL 94HB in the part’s final, finished configuration. Not intended for specification purposes. | |||