Co-extruded, High Impact ABS, Soft Touch Sheet
Introduction
ALLEN® 5300WST is a co-extruded sheet consisting of a soft-touch, low gloss ASA cap over a high impact ABS substrate. It is designed to provide a sheet with high impact resistance with a tactile, non-slip surface.
General
Information
ALLEN® 5300WST meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302) at INFORMATION 0.060” (1.52mm).
Suggested
Applications
- Truck interiors
- APPLICATIONS • Recreational vehicles
- Agricultural cab interiors
- Dashes/Consoles
- Shrouds
Features
- Custom color matching
- Ease of processing
- Regrind compatible in future orders
- Matte gloss finish
- High impact resistance
- Slip resistance
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity (Density) | ASTM D792 | 1.05 (1.05 g/cm3) | |
| Moisture Absorption, 24 hr | ASTM D570 | 0.50% | |
| Rockwell Hardness, R-Scale | ASTM D785 | 70 | |
| Gloss (60o) | ASTM D2457 | 102 | |
| MECHANICAL | |||
| Tensile Strength, yield | ASTM D638 | 36.9 MPa | 5,350 psi |
| Tensile Modulus | ASTM D638 | 1,875.4 MPa | 272,000 psi |
| Flexural Stress at 5% Strain | ASTM D790 | 49.6 MPa | 7,200 psi |
| Flexural Modulus | ASTM D790 | 1,578.9 MPa | 229,000 psi |
| Compressive Strength, yield | ASTM D695 | 50.6 MPa | 5,110 psi |
| Shear Strength | ASTM D732 | 37.4 MPa | 4,970 psi |
| Bearing Strength, 4% deflection | ASTM D953 | 20.3 MPa | 1,760 psi |
| Bearing Strength, max. | ASTM D953 | 171.7 MPa | 17,200 psi |
| Notched Izod Impact Resistance | ASTM D256 | 320 J/m | 6.0 ft-lbs/in |
| Gardner Drop Dart Impact | ASTM D5420 | 35.6 J/m | 316 in-lbs f |
| THERMAL | |||
| Heat Deflection Temperature (HDT) 264 psi (1.8 MPa), Unannealed | ASTM D648 | 80.5°C | 177°F |
| Heat Deflection Temperature (HDT) 66 psi (0.45 MPa), Unannealed | ASTM D648 | 94.0°C | 201°F |
| Coefficient of Thermal Expansion (MD) | ASTM E831 | 89.9 μm/m/°C | 49.9 μin/in/°F |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 18.7 kV/mm | 475 V/mil |
| FLAMMABILITY | |||
| Motor Vehicle Safety Standard3 | FMVSS 302 | Pass | |
| 1 Values based upon 0.125” (3.17mm) sheet unless otherwise specified.. 2 Value will vary depending on sheet texture. Stated value will represent upper limit on a smooth surface. 3 0.060” (1.52mm) and above Not intended for specification purposes. | |||