Co-extruded, High Impact ASA/ABS, Low to Medium Gloss Sheet
Introduction
ALLEN® 5060WLG is high impact ABS capped with ASA for UV protection and low to medium gloss finish.
General
Information
ALLEN® 5060WLG has been tested under laboratory conditions and has achieved a UL94 HB rating at 0.060 in INFORMATION (1.52mm) and above and meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Vehicle Exteriors
- APPLICATIONS • Marine Parts
- Radomes
- Agriculture Equipment Exteriors
- Construction Equipment Exteriors
- Lift Boom Exteriors
Features
- Custom color matching
- Excellent UV properties
- Edge trim easily used into future orders
- Low to medium gloss finish
- Color and gloss retention
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.03 | |
| Density | ASTM D792 | 1.03 g/cm3 | 0.037 lb/in3 |
| Water Absorption, equilibrium, 73oF | ASTM D570 | 0.27% | |
| Rockwell Hardness, R-scale | ASTM D785 | 93 | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 42.0 MPa | 6,090 psi |
| Tensile Modulus | ASTM D638 | 1909.8 MPa | 277,000 psi |
| Flexural Stress at 5% Strain | ASTM D790 | 63.4 MPa | 9,190 psi |
| Flexural Moduluus | ASTM D790 | 1985.7 MPa | 288,000 psi |
| Compressive Strength, yield | ASTM D695 | 47.5 MPa | 6,890 psi |
| Shear Strength | ASTM D732 | 39.2 MPa | 5,690 psi |
| Bearing Strength, 4% deflection | ASTM D953 | 20.3 MPa | 2,940 psi |
| Bearing Strength, max. | ASTM D953 | 177.2 MPa | 25,700 psi |
| Notched Izod Impact Resistance | ASTM D256 | 283.5 J/m | 5.3 ft-lbs/in |
| Notched Izod Impact Resistance @ -20°F (-29°C) | ASTM D256 | 165.5 J/m | 3.1 ft-lbs/in |
| Gardner Drop Dart Impact, GE | ASTM D5420 | 46.1 J | 408 in-lb f |
| Gardner Drop Dart Impact, GE @ -20°F (-29°C) | ASTM D5420 | 24.7 J | 219 in-lb f |
| THERMAL | |||
| Heat Deflection Temperature (HDT) 264 psi (1.8 MPa), Annealed | ASTM D648 | 91.0°C | 195.8°F |
| Heat Deflection Temperature (HDT) 66 psi (0.45 MPa), Annealed | ASTM D648 | 96.2°C | 205.2°F |
| Coefficient of Thermal Expansion (TD) | ASTM E831 | 97.7 μm/m/°C | 54.3 μin/in/°F |
| ELECTRICAL | |||
| Dielectric Strength, oil | ASTM D149 | 20.4 kV/mm | 517 V/mil |
| FLAMMABILITY2 | |||
| Underwriters Laboratories., Inc ® Component Recognition | UL Standard 942 | HB @ 0.060 in (1.52mm) | |
| Motor Vehicle Safety Standard | FMVSS 302 | Passes | |
| 1 Values based upon 0.125” (3.17mm) sheet unless otherwise specified.. 2 ALLEN® 5060WLG has been tested under laboratory conditions and has passed UL 94HB criteria. SEKISUI KYDEX, LLC makes no warranty or guarantee that these products will meet UL 94HB in the part’s final, finished configuration. Not intended for specification purposes. | |||