FDA grade, high impact ABS, medium gloss sheet
Introduction
ALLEN® 4055F is a general purpose ABS that has high impact strength and a good cost to performance ratio to other materials like stainless steel, and other thermoplastics.
General
Information
ALLEN® 4055F has been tested under laboratory conditions and has achieved a UL94 HB rating at 0.060 in INFORMATION (1.52mm) and above and meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302) and US Food And Drug Administration 21 CFR 181.32 (Acrylonitrile copolymers and resins).
Suggested
Applications
- Covers for food processing equipment
- APPLICATIONS • Splash zone guards
- Deli risers
Features
- Custom color matching
- FDA 21 CFR 181.32 compliant
- Medium gloss finish
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.02-1.04 g/cc | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 5,800 psi | 39.9 MPa |
| Flexural Modulus | ASTM D790 | 302,000 psi | 2082.2 MPa |
| Flexural Strength | ASTM D790 | 9,700 psi | 66.8 MPa |
| Notched Izod Impact, 23 oC (73 oF) | ASTM D256 | 8.1 ft-lb/in | 432 J/m |
| Notched Izod Impact, -17 oC (0 oF) | ASTM D256 | 5.6 ft-lb/in | 299 J/m |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @66 psi (.45 MPa), unannealed | ASTM D648 | 200 oF | 93.3 oC |
| Mold Shrinkage | ASTM D955 | 0.005-0.007 in/in | |
| FLAMMABILITY | |||
| Underwriters Laboratories., Inc ® Component Recognition | UL Standard 942 | HB @ 0.060 in (1.52mm) | |
| Motor Vehicle Safety Standard | FMVSS 302 | PASS | |
| 1 Values based upon injection molded resin. 2 ALLEN® 4175F has been tested under laboratory conditions and has passed UL 94HB criteria. SEKISUI SPI makes no warranty or guarantee that these products will meet UL 94HB in the parts final, finished configuration. Not intended for specification purposes. | |||