[site_banner]

Home / ALLEN® 4050F Technical Data Sheet

ALLEN® 4050F Technical Data Sheet

FDA grade, medium impact ABS, medium gloss sheet

Download

Introduction

ALLEN® 4050F is a general purpose ABS with medium impact and a medium gloss finish.

General
Information

ALLEN® 4050F has been tested under laboratory conditions and has achieved a UL94 HB rating at 0.060 in INFORMATION (1.52mm) and above and meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302) and US Food And Drug Administration 21 CFR 181.32 (Acrylonitrile copolymers and resins).

Suggested
Applications

  • Covers for food processing equipment
  • APPLICATIONS • Splash zone guards
  • Deli risers

Features

  • Custom color matching
  • Good forming properties
  • FDA 21 CFR 181.32 compliant
  • Medium gloss finish

Environmental
& Safety
Considerations

SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.

Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.

Property Test Method Typical Value1
PHYSICAL
Specific Gravity ASTM D792 1.05
Gloss, 60° Angle ASTM D523 50 – 70%
MECHANICAL
Tensile Strength ASTM D638 5,200 psi 35.8 MPa
Flexural Modulus ASTM D790 290,000 psi 1,999 MPa
Flexural Strength ASTM D790 8,600 psi 59.2 MPa
Notched Izod Impact, 23 oC (73 oF) ASTM D256 4.9 ft-lb/in 261 J/m
Notched Izod Impact, -17 oC (0 oF) ASTM D256 2.4 ft-lb/in 128 J/m
THERMAL
Heat Deflection Temperature (HDT) @66 psi (.45 MPa), unannealed ASTM D648 200 oF 93.3 oC
Mold Shrinkage ASTM D955 0.004 – 0.007 in/in
FLAMMABILITY
Underwriters Laboratories., Inc ® Component Recognition UL Standard 942 HB @ 0.060 in (1.52mm)
Motor Vehicle Safety Standard FMVSS 302 PASS
1 Values based upon injection molded resin. 2 ALLEN® 4100F has been tested under laboratory conditions and has passed UL 94HB criteria. SEKISUI SPI makes no warranty or guarantee that these products will meet UL 94HB in the parts final, finished configuration. Not intended for specification purposes.