Co-extruded, Medium Impact ABS, Medium Gloss Sheet
Introduction
ALLEN® 2090MG is a general purpose ABS that has medium impact strength, a medium gloss finish and a good cost to performance ratio to other materials like painted metal, FRP, aluminum, and other thermoplastics..
General
Information
ALLEN® 2090MG has been tested under laboratory conditions and has achieved a UL94 HB rating at 0.060 in INFORMATION (1.52mm) and above and meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Covers and Housings
- APPLICATIONS • Vehicle Interiors
- Office Furniture
- Displays
- Signs
Features
- Custom color matching
- Good forming properties
- Edge trim easily used into future orders
- UV protective films available
- Medium gloss finish
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.06 g/cc | |
| Gloss, 60° Angle | ASTM D523 | 50 – 70% | |
| MECHANICAL | |||
| Tensile Strength, yield | ASTM D638 | 28.8 MPa | 4,170 psi |
| Flexural Stress at 5% Strain | ASTM D790 | 50.1 MPa | 7,270 psi |
| Flexural Modulus | ASTM D790 | 2,027 MPa | 294,000 psi |
| Notched Izod Impact Resistance, 73°F | ASTM D256 | 146 J/m | 2.74 ft-lbs/in |
| Notched Izod Impact Resistance, 0°F | ASTM D256 | 79 J/m | 1.49 ft-lbs/in |
| THERMAL | |||
| Heat Deflection Temperature (HDT) 66 psi (0.45 MPa), Unannealed | ASTM D648 | 96.5°C | 205.7°F |
| Mold Shrinkage | ASTM D955 | 0.005 – 0.007 in/in | |
| FLAMMABILITY | |||
| Motor Vehicle Safety Standard | Component Recognition | Pass | |
| 1 Values based upon injection molded resin Not intended for specification purposes. | |||