Co-extruded, Medium Impact ABS, Matte Gloss Sheet
Introduction
ALLEN® 2055MT is a general purpose ABS with medium impact strength and a matte gloss finish.
General
Information
ALLEN® 2055MT has been tested under laboratory conditions and meets the requirements of Federal Motor Vehicle INFORMATION Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Covers and Housings
- APPLICATIONS • Motor Vehicle Interior dashboards, panels, trim, headliners and B pillars
- RV Interiors
- Heavy Truck Interiors
- Construction Vehicle Interiors
- Displays
- Fork Lift Trucks
- Agricultural Equipment Interiors
Features
- Custom color matching
- Good forming properties
- Edge trim easily used in future orders
- Matte Gloss
Environmental
& Safety
Considerations
SEKISUI KYDEX, LLC is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.05 g/cc | |
| Gloss, 60° Angle | ASTM D523 | <15% | |
| MECHANICAL | |||
| Tensile Strength, yield | ASTM D638 | 34.4 MPa | 5,000 psi |
| Flexural Stress at 5% Strain | ASTM D790 | 55.1 MPa | 8,000 psi |
| Flexural Modulus | ASTM D790 | 1,930.5 MPa | 280,000 psi |
| Notched Izod Impact Resistance, 73°F | ASTM D256 | 213 J/m | 4.0 ft-lbs/in |
| Notched Izod Impact Resistance, 0°F | ASTM D256 | 106 J/m | 2.0 ft-lbs/in |
| THERMAL | |||
| Heat Deflection Temperature (HDT) 66 psi (0.45 MPa), Unannealed | ASTM D648 | 90.5°C | 195°F |
| Mold Shrinkage | ASTM D955 | 0.005 – 0.007 in/in | |
| FLAMMABILITY | |||
| Motor Vehicle Safety Standard | Component Recognition | Pass | |
| 1 Values based upon injection molded resin. Not intended for specification purposes. | |||