Medium Impact ABS, Low Gloss Sheet
Introduction
ALLEN® 2035LG is a general purpose ABS with medium impact and a low gloss finish.
General
Information
ALLEN® 2035LG has been tested under laboratory conditions and has achieved a UL94 HB rating at 0.060 in INFORMATION (1.52mm) and above and meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Medical Equipment Housings
- APPLICATIONS • Food Equipment Trays & Housings
- Display
- Signs
Features
- Custom color matching
- Good forming and fabricating properties
- Edge trim easily used in future orders
- Low gloss finish
Environmental
& Safety
Considerations
SEKISUI KYDEX is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.05 g/cc | |
| Gloss, 60° Angle | ASTM D523 | 50-70% | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 5,200 psi | 35.8 MPa |
| Flexural Modulus | ASTM D790 | 290,000 psi | 1,999.4 MPa |
| Flexural Strength | ASTM D790 | 8,600 psi | 59.2 MPa |
| Notch Izod Impact, 73°F | ASTM D256 | 4.9 ft-lbs/in | 261 J/m |
| Notch Izod Impact, 0°F | ASTM D256 | 2.4 ft-lbs/in | 128 J/m |
| THERMAL | |||
| Heat Deflection Temperature (HDT) @66 psi (0.45 MPa), unannealed | ASTM D648 | 200 oF | 93.4 oC |
| Heat Deflection Temperature (HDT) @264 psi (1.8 MPa), unannealed | ASTM D648 | 190 oF | 87.8 oC |
| Mold Shrinkage | ASTM D955 | 0.004-0.007 in/in | |
| FLAMMABILITY | |||
| Underwriters Laboratories., Inc ® Component Recognition | UL Standard 942 | HB @ 0.060 in (1.52mm) | |
| Motor Vehicle Safety Standard | Component Recognition | PASS | |
| 1 Values based upon injection molded resin 2 ALLEN® 2035LG has been tested under laboratory conditions and has passed UL 94HB criteria. SEKISUI SPI makes no warranty or guarantee that these prod- ucts will meet UL 94HB in the part’s final, finished configuration. Not intended for specification purposes. | |||