Co-extruded, Medium Impact, ABS Sheet (Low Gloss)
Introduction
ALLEN® 2030LG is a general purpose ABS that has medium impact strength and a good cost to performance ratio to other materials like painted metal, FRP, aluminum, and other thermoplastics.
General
Information
ALLEN® 2030LG has been tested under laboratory conditions and meets the requirements of Federal Motor Vehicle INFORMATION Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Marine products
- APPLICATIONS • Recreational Vehicles
- Agricultural cab interiors
- Truck interiors
- Equipment covers
- P.O.P Displays
Features
- Custom color matching
- Excellent UV properties
- Edge trim easily used into future orders
- Low gloss finish
- Color and gloss retention
Environmental
& Safety
Considerations
SEKISUI KYDEX is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.06g/cc | |
| Gloss, 60° Angle | ASTM D523 | 15-30% | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 4,170 psi | 28.8 MPa |
| Flexural Modulus | ASTM D790 | 294,000 psi | 2,027 MPa |
| Flexural Strength | ASTM D790 | 7,270 psi | 50.1 MPa |
| Notch Izod Impact, 73°F | ASTM D256 | 2.74 ft-lb/in | 146 J/m |
| Notch Izod Impact, -20°F | ASTM D256 | 1.49 ft-lb/in | 79 J/m |
| THERMAL | |||
| Heat Deflection Temperature (HDT) 66 psi ( 0.45 MPa), unannealed | ASTM D648 | 205.7°F | 96.5°C |
| Mold Shrinkage | ASTM D955 | 0.005-0.007 in/in | |
| FLAMABILITY | |||
| Motor Vehicle Safety Standard | Component Recognition | Passes | |
| 1 Values based upon injection molded resin Not intended for specification purposes. | |||