Co-extruded, Medium Impact, Low Gel, Medium Gloss Sheet
Introduction
ALLEN® 2012L is a general purpose ABS that has medium impact strength and a good cost to performance ratio to other materials like painted metal, FRP, aluminum, and other thermoplastics.
General
Information
ALLEN® 2012L has been tested under laboratory conditions and meets the requirements of Federal Motor Vehicle INFORMATION Safety Standard No. 302 (FMVSS 302).
Suggested
Applications
- Marine products
- APPLICATIONS • Recreational Vehicles
- Agricultural cab interiors
- Truck interiors
- Equipment covers
- P.O.P Displays
- Film laminations
Features
- Edge trim easily used in future orders
- Medium gloss finish
Environmental
& Safety
Considerations
SEKISUI KYDEX is committed to ensuring that its products can be manufactured, transported, stored, used, & SAFETY disposed and recycled with an appropriate regard for safety, health, and environmental protection. We support the safe handling of our products.
Please contact our appLab™ department at 800.682.8758 for resources and Safety Data Sheets or visit our website: www.kydex.com.
| Property | Test Method | Typical Value1 | |
|---|---|---|---|
| PHYSICAL | |||
| Specific Gravity | ASTM D792 | 1.05g/cc | |
| Gloss, 60° Angle | ASTM D523 | 80% | |
| MECHANICAL | |||
| Tensile Strength | ASTM D638 | 5,000 psi | 34.4 MPa |
| Flexural Modulus | ASTM D790 | 280,000 psi | 1,930.5 MPa |
| Flexural Strength | ASTM D790 | 8,000 psi | 55.1 MPa |
| Notch Izod Impact, 73°F | ASTM D256 | 4.0 ft-lb/in | 213 J/m |
| Notch Izod Impact, 0°F | ASTM D256 | 2.0 ft-lb/in | 106 J/m |
| THERMAL | |||
| Heat Deflection Temperature (HDT) 66 psi ( 0.45 MPa), unannealed | ASTM D648 | 195°F | 90.6°C |
| Mold Shrinkage | ASTM D955 | 0.005-0.007 in/in | |
| FLAMABILITY | |||
| Motor Vehicle Safety Standard | Component Recognition | Passes | |
| 1 Values based upon injection molded resin Not intended for specification purposes. | |||